CONTACT US: 1-800-668-5236 | info@clarionmedical.com

HS graphicHOTSCULPTING ... "Some like it HOT!!"

Introducing HOTSCULPTING

The first non-invasive fat reduction treatment using the combined power of Nd:YAG and Er:YAG lasers to remove fat, tighten, and rejuvenate the skin all in one treatment session.

Non-Invasive

HOTSCULPTING is a gentle heating of the fat cells causing hyperthermic lipolysis and neocollagenesis. The flexibility of the hand painting technique allows you to cover any area of the body with a simple delivery of the handpiece and energy directly over the target area.

Twice the area coverage

Hand painting allows you to cover a large area while maintaining an optimal skin temperature of 42 - 47 degrees Celsius. You are not restricted by the size of a fixed appliance like you are with the other competitive single purpose machines. You can easily treat a 200 sq cm area or larger in a single 15 minute session.

Less than half the treatment time

Studies have shown that the fat cell only needs to be exposed to the higher temperature for a period of less than ten minutes to cause apoptosis. The fat reduction protocol for HOTSCULPTING using the Nd:YAG laser is only 8-10 minutes. This is followed by a 3-5 minute Er:YAG dermal collagen remodelling and tightening treatment. The total treatment time is 15 minutes. Recovery time is quick and no cleanup is required. Multiple treatments are utilized to optimize both the fat reduction and tightening.

No Consumables

Other competitors offer single purpose equipment and then charge you every time you do a treatment. They claim it pays for advertising but are you getting your moneys worth? HOTSCULPTING has NO CONSUMABLES (Call it a "TREATMENT TAX"). That is a saving of upwards of $100,000 per year that you would have to pay the competitor for use of their equipment. Our loss is your gain.

Clinical References

Nd:YAG and Er:YAG

Nd:YAG at 1064nm wavelength has the capability to penetrate deep within the dermis to affect the fat cells. The Piano mode allows for up to 23 second long pulse width, heating gently with a feeling like a warm bath or a hot stone massage. Affected cells go into apoptosis soon after the procedure.
Er:YAG at 2940nm wavelength is perfect for collagen remodelling. By using the Smooth pulse mode the energy is controlled to provide superficial heating without ablation.

Fat Reduction with Nd:YAG

The inital part of the treatment is for fat reduction. The technician uses the Nd:YAG 1064nm laser and R34-20mm spot size handpiece. They select the settings for the Piano pulse width protocol on the user friendly display. The technician starts the energy source by depressing the wireless footswitch, and using the hand painting methodology covering the entire treatment area in a back and forth motion. Periodically they will test the skin temperature to make sure they are operating in the 42-47 degrees C range. If adjustments are necessary the technician simply changes the settings on the display and begins hand painting again.

Tightening with Er:YAG

The second part of the treatment is for additional collagen remodelling and skin tightening. The technician uses the Er:YAG 2940nm laser and R11-7mm or R04-12mm spot size handpiece. They select the settings for Smooth pulse width protocol on the user friendly display. The technician again starts the energy source by depressing the wireless footswitch, and using the hand painting methodology to cover the entire treatment area in a back and forth, up and down motion. If adjustments are necessary the technician simply changes the settings on the display and begins hand painting again. What could be easier!!

Latest Clinical News

1

December

2015

Dr. Martin Braun on HOTSCULPTING

I have had the SP Dynamis in my practice now for 6 months and the response of my patients and staff to the treatments is fabulous. I make more money because there is NO CONSUMABLE (Treatment Tax) to Fotona, saving me over $100,000 per year and lowering the cost that the patient has to pay.

1

December

2015

Susan Ling RN

I have been doing the HOTSCULPTING treatment now for some time and it is extemely easy to perform.With virtually no setup and post procedure routine for clean up. It makes my job easy and gives me a chance to get to really know my patient and their needs. I am not at all fatigued at the end of the day from hand painting.

1

December

2015

Patient Story

When I first heard of the Hotsculpting procedure being done by Dr. Gaspar in Argentina I was intrigued. So I had a technician at our inhouse clinic perform the treatment on me. I was a little chubby around the mid section. I was amazed at how comfortable the treatment was and even more amazed at the results. The instant feeling of skin tightening with the long term loss of fat cells changing the contour of my love handles.

1

December

2015

Patient Story

I love the treatment. I was concerned about hyperpigmentation with my darker skin type, but the treatment was done and there are no signs of it. I was in and out within 20 minutes, which was perfect for my busy schedule. I already feel like my bra fat area is contracting and firmer than before even after the first treatment.

Service and Support News

1

December

2015

Implementation Plans

Installation and implementation of your SP Dynamis is easy. Once it arrives a service technician will uncrate and perform diagnostics on the machine. At the same time a clinical trainer will schedule to come annd train your staff on the use of the many functions on the SP Dynamis. Application guides and Operator manuals are available directly from the Clarion Portal.
After your warranty period, service plans are available from Clarion. Our local service technicians can respond in as little as 4 hours. We will get you up and running as quickly as possible and ensure that we do everything to make your ownership experience carefree.

1

December

2015

Clinic Marketing Package

We help you market to your existing clients and new clients. Patient brochures, brochure holders, posters, entranceway banner, loop video of before/after images, are available for you to seemlessly integrate HOTSCULPTING into your practice. Clarion Connect Portal has all of the digital marketing materials for you in one place. Click on the image above to get started educating your patients today.

Contact Us

Clarion Medical Technologies

Address: 125 Fleming Drive

Country: Cambridge, Ontario N1T 2B8

Phone:1-800-668-5236

E-mail: info@clarionmedical.com


Social

Clarion Medical Facebook

Clarion Medical Twitter

Clarion Medical Technologies Website

Your patients are looking for this service - start participating in this opportunity to expand your practice today.

Your patients will love you for providing this service...

Click here to send us your request to have us contact you today.